Library

Portal to drilling documents and publications of interest to the ice drilling community. There are currently 516 documents in the Library. See Publications for a list of peer reviewed publications from projects that received IDPO-IDDO field support.

Ice Cutting
Citation Year
Talalay PG . 2016 . Mechanical Ice Drilling Technology, Springer Geophysics, doi: 10.1007/978-981-10-0560-2_1 2016
Cao P, Chen B, Liu C, Yang C, Talalay P . 2015 . Experimental investigation of cutting temperature in ice drilling, Cold Regions Science and Technology, Volume 116, Pages 78-85, doi: 10.1016/j.coldregions.2015.04.008 2015
Hong J, Fan Z, Liu Y, Liu G, Liu B and Talalay P . 2015 . Size distribution and shape characteristics of ice cuttings produced by an electromechanical auger drill, Cold Regions Science and Technology, Volume 119, Pages 204-210, doi: 10.1016/j.coldregions.2015.08.012 2015
Hong J, Talalay P, Sysoev M, Fan X . 2014 . DEM modeling of ice cuttings transportation by electromechanical auger core drills, Annals of Glaciology, Volume 55, Number 68, Pages 65-71, doi: 10.3189/2014AoG68A002 2014
Talalay PG . 2014 . Drill heads of the deep ice electromechanical drills, Cold Regions Science and Technology, Volume 97, Pages 41-56, doi: 10.1016/j.coldregions.2013.09.009 2014
Talalay PG . 2012 . Drill Heads of the Deep Ice Electromechanical Drills, Technical Report PRC 12-03, Polar Research Center, Jilin University, China 2012
Azuma N, Tanabe I and Motoyama H . 2007 . Heat generated by cutting ice in deep ice-core drilling, Annals of Glaciology, Volume 47, Number 1, Pages 61-67, doi: 10.3189/172756407786857848 2007
Wilhelms F, Sheldon SG, Hamann I, Kipfstuhl S . 2007 . Implications for and findings from deep ice core drillings - an example: the ultimate tensile strength of ice at high strain rates, In Kuhs WF ed. Physics and chemistry of ice. (Special Publication 311) Royal Society of Chemistry, Cambridge, Pages 635-639 2007
Talalay PG . 2006 . Removal of cuttings in deep ice electromechanical drills, Cold Regions Science and Technology, Volume 44, Issue 2, Pages 87-98, doi: doi:10.1016/j.coldregions.2004.08.005 2006
Narita H, Shinbori K and Kodama Y . 1994 . An experiment on ice cutting under high liquid pressure and low temperature, Memoirs of National Institute of Polar Research, Special Issue No. 49, Pages 124-131 1994
Vasiliev NI and Talalay PG . 1994 . Investigation of the ice cutting process by the rotary drill, Memoirs of National Institute of Polar Research, Special Issue No. 49, Pages 132-137 1994
Koci B . 1991 . Review Methods for Cutting Ice Cores, PICO TN-91-06, Pages 1-2 1991
Jois SS, Das DK and Koci B . 1990 . Temperature Rise in Ice Cores During a Water Jet Cutting Process, PICO TR-90-03, Pages 1-7 1990
Ueda HT and Kalafut J . 1989 . Experiments on the Cutting Process in Ice, CRREL Report 89-5 1989
Kuivinen KC and Sonderup JM . 1988 . Electromechanical Ice Core Drilling Systems: A Discussion, Ice Core Drilling. Proceedings of the Third International Workshop on Ice Drilling Technology (eds C. Rado and D. Beaudoing), Pages 54-56 1988
Koci BR . 1984 . New Horizons in Drill Development, Proceedings of the Second International Workshop/Symposium on Ice Drilling Technology (eds G. Holdsworth, K.C. Kuivinen and J.H. Rand), CRREL Special Report 84-34, Pages 51-54 1984
Mellor M and Sellmann PV . 1976 . General Considerations For Drill System Design, Ice-Core Drilling (ed. J.F. Splettstoesser), University of Nebraska Press, Lincoln, NE, Pages 77-111 1976
17 records match your search

This material is based upon work supported by the National Science Foundation under Cooperative Agreement No. PLR-1327315 to Dartmouth, and sub awards to University of New Hampshire, University of Wisconsin and Colorado School of Mines which support the work of the Ice Drilling Program Office (IDPO). Any opinions, findings, and conclusions or recommendations expressed in this material are those of the author(s) and do not necessarily reflect the views of the National Science Foundation.